The Boat Anchor Manual Archive
Mirror: /gr/1687/

This is the BAMA archive. These manuals are available for download and free of charge.

NEW! For latest updates and news, check out the news page

I am now accepting new manuals for inclusion in this archive. Contact and submission information below

Google
 
Web bama.edebris.com

Directories:

Parent

rom_info:

Genrad no longer supports the 1687 and parts are no longer available.

These 99 png sheets were scanned at 600dpi from the original Genrad
1687 manual, and special care was taken to preserve the halftones.

The SXC2316B aka MK28XXX ROMS in this digibridge have been known to
die of old age. This used to be a common pinout.

Here is the pinout of the MK28xxx series. CS depends on part number.
   A7    1           24   Vcc
   A6    2           23   A8
   A5    3           22   A9
   A4    4           21   CS3
   A3    5           20   CS1
   A2    6           19   A10
   A1    7           18   CS2
   A0    8           17   D7
   D0    9           16   D6
   D1   10           15   D5
   D2   11           14   D4
  GND   12           13   D3

The 2716 does not have the needed chip select logic.
    +--------------+
 A7 |1    +--+   24| VCC
 A6 |2           23| A8
 A5 |3           22| A9
 A4 |4           21| VPP
 A3 |5           20| /OE
 A2 |6           19| A10
 A1 |7    2716   18| /CE
 A0 |8           17| D7
 D0 |9           16| D6
 D1 |10          15| D5
 D2 |11          14| D4
GND |12          13| D3
    +--------------+

So it probably makes sense to stuff the data from the 2Kx8
Mask ROMS into an 8kx8 EPROM or EEPROM chip with an active
high chip select pin for use with A15 and upper two address
lines for A11 and A14 as follows:
   C28187M -> 1800-1FFF
   C28186M -> 1000-17FF
   No Data -> 0800-0FFF
   C28145M -> 0000-07FF
WRONG: To replace these ROMS with ordinary 2764 EPROM you will need to
WRONG: make a socket adapter with the following pin connection changes:
WRONG:    EPROM-Vpp-pin-1 connects to +5V
WRONG:    EPROM-PGM-pin-27 connects to +5V
WRONG:    EPROM-/CE-pin-20 connects to GND
WRONG:    EPROM-/OE-pin-22 connects to ROM-/CE-pin-20

These ROMS can be read on an EPROM programmer as a 2716
if you jumper out the chip-select ping in an adapter socket.

...Stepan

00readme:

Manual for GR 1687 Megahertz LC Digibridge.
Compliments of Stepan Novotill.

Files:

1687.pdf (21 MB)


This is the BAMA archive. These manuals are available for download and free of charge.


Wiki:

New! and Experimental! A wiki page is now available so you can share your work with others. have a look: http://bama.edebris.com/wiki/index.php?title=gr/1687.

Viewers:

These viewers may be required to view the manuals on this archive:

Get DjVu Reader Get Adobe Reader XnView Image Viewer IrFanView Image Viewer Picasa

If anyone knows of additional suitable GIF/JPEG viewers that are free to use, email me and I will include a link.

Links

Contact Information:

Submitting a Manual

If you have a better copy of any of these manuals or a manual which is not listed, and wish to share, you can upload the manual to ftp://bama.edebris.com/uploads/ . Or, you can email me directly with the manual. I accept all formats.

Page generated on: Jun 19, 2013
© 2004-2012 Edward Kujawski

This page took 0.044 seconds to render